Tokens Direct

Metal Tokens

Available materials and their thickness [other materials available on request]

Thickness in mm
Ref no   Name Composition (alloy) Colour
1.50
1.75
2.00
2.25
2.75
T-A BRASS Cu 63% - Zn 37% Gold
x
x
x
x
x
T-B BRASS nickel-plated Cu 63% - Zn 37% + nickel- layer Silver
x
x
x
x
x
T-C Ms70 Cu 70% - Zn 30% Gold
x
x
T-D Ms70 nickel-plated Cu 70% - Zn 30% + nickel- layer Silver
x
x
T-E ALPACA 2% Cu 70% - Zn 28% - Ni 2% Gold
x
x
x
T-F ALPACA 6% Cu 70% - Zn 24% - Ni 6% Gold
x
x
x
T-G ALPACA 12% Cu 64% - Zn 24% - Ni 12% Silver
x
x
x
x
x
T-H ALPACA 18% Cu62%-Zn20%-Ni18% Silver
x
T-I NICLAL725 Cu 89% - Sn 9% - Ni 2% Silver-pink
x
T-J 92/6/2 Cu 92% - Al 6% - Ni 2% Bronze
x
T-K RED COPPER Cu 100% Red
x
x
x
T-L INOX Stainless steel Silver
On Request

Available diameters in mm

18.50 19.00 19.75 20.00 21.00 21.20 21.35 21.55 22.00 22.30 23.00 23.30
23.50 24.00 24.30 24.50 24.75 25.00 25.50 26.00 26.30 26.50 26.75 27.00
27.25 27.75 28.00 28.20 28.40 29.00 30.00 30.40 30.60 31.00 32.00  

Bi-Metal Tokens

Available dimensions and materials [other materials available on request]

Ref no   Diameter Thickness Outside material (colour) Inside material (colour)
BT-A 24.25 mm 1.75 mm BRASS (gold) ALPACA 12% (silver)
BT-B 24.25 mm 1.75 mm ALPACA 12% (silver) BRASS (gold)
BT-C 26.75 mm 1.75 mm BRASS (gold) ALPACA 12% (silver)
BT-D 26.75 mm 1.75 mm BRASS (gold) NICLAL 725 (silver-pink)
BT-E 26.75 mm 1.75 mm ALPACA 12% (silver) BRASS (gold)
BT-F 26.75 mm 1.75 mm ALPACA 12% (silver) NICLAL 725 (silver-pink)
BT-G 26.75 mm 1.75 mm NICLAL 725 (silver-pink) BRASS (gold)
BT-H 26.75 mm 1.75 mm NICLAL 725 (silver-pink) ALPACA 12% (silver)
BT-I 29.00 mm 1.75 mm BRASS (gold) ALPACA 12% (silver)
BT-J 29.00 mm 1.75 mm ALPACA 12% (silver) BRASS (gold)
BT-K 31.00mm 2.00 mm BRASS (gold) ALPACA 12% (silver)
BT-L 31.00mm 2.00 mm ALPACA 12% (silver) BRASS (gold)

Design
We can mint your token with a personalised image and/or text of your choice. A matrix must be made for each side, and a share of the matrix costs will be accounted to you. Alternatively, you can use one of our standard logos free of charge. All logos remain in our possession.

For personalised logos, you should send us a design or a drawing by mail, fax or e-mail. Take into account that we will elaborate the design based upon the material you supply to us, and therefore cannot make a design without clear instructions from your side.

Optional
Your tokens can, upon payment of a supplement, be provided with a centre-hole.

Quality & finishing
The quality of the image and the measurements are meticulously controlled throughout the whole production process. The tolerance on the measurements of your tokens carries a maximum +/- 0.08 mm in thickness and +/- 0.05 mm in diameter. At the end of the production process, the tokens are cleaned and polished to maintain surface finish.

Packaging and delivery
Your tokens are standardly packed in strong plastic bags. Depending on quantity, destination and method of shipping, these bags may further be packed in boxes or wooden crates, with or without a pallet. The method of delivery is decided in consultation with you.